Coffee Affection is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more.

How to Turn Off the Flashing Clean Light on Mr. Coffee (4 Ways!)

Mr. Coffee clean light stays on

The clean light on your Mr. Coffee is a useful feature, letting you know when it is time to do a little maintenance. But if your clean light keeps flashing after you run a deep cleaning cycle, it stops being useful and starts being frustrating.

Luckily, there are some easy fixes. Keep reading to see our tips and tricks to turning off your clean light — until you need it, that is.

divider 4

Top 4 Easy Ways to Turn Off Your Mr. Coffee Clean Light:

1. Check to see if your Mr. Coffee is clean.

Even if you have been faithfully rinsing your carafe and filter basket every time you brew, your coffee machine could be less than sparkling. Look for chalky mineral buildup in your carafe, water reservoir, and filter basket. If you see any buildup, it’s time for a deep clean.

Mr. Coffee recommends that you run a cleaning cycle with vinegar or store-bought cleaning solution about every 80-90 brew cycles. If you live in an area with hard water, you’ll need to clean your coffee maker more often, about every 40 brew cycles. Descaling regularly will keep your coffee maker running smoothly.

2. Carefully follow the directions in the user manual.

Reading the user manual isn’t the most fun way to spend your day, but it can be the best way to keep your machine from malfunctioning. Read the cleaning section and carefully follow each step.

After you pour in vinegar or cleaning solution, push the start button, ensuring that the cleaning light stays red and stops blinking. You may need to push the button three times.

The cleaning cycle should take about 60 minutes. Your machine will pause partway through to allow the cleaning solution to sit in the carafe. Don’t unplug or turn off your machine while the cleaning cycle is running, as this may cause the light to stay on.

After the cleaning cycle finishes, rinse your carafe and filter basket thoroughly. You don’t want to taste the vinegar in your next pot of coffee!

If you didn’t save your user manual, you may be able to find it online.

Mr. Coffee clean light always on

3. Unplug and wait a minute.

A classic technology trick: unplug your coffee maker and let it sit for a minute or two. Then plug it back in. This will reset the machine, likely turning off your pesky flashing clean light.

4. Check the warranty.

If all else fails, check if your Mr. Coffee is under warranty. These coffee makers typically come with a limited one-year warranty, so if you’re within that time frame, Mr. Coffee may repair your machine for you.


Mr. Coffee clean light stays on
Print
5 star average

4 Easy Ways to Turn Off Your Mr. Coffee Clean Light:

If your Mr. Coffee's clean light keeps flashing, you'll need to know how to turn it off. Here are the 4 easiest ways to turn off a Mr. Coffee clean light that stays on.
Prep Time5 minutes
Active Time6 minutes
Cleaning Cycle1 hour
Total Time1 hour 11 minutes
Keyword: cleaning, how to turn off mr coffee flashing clean light, mr coffee

Materials

  • White vinegar or descaling solution

Instructions

Check to see if your Mr. Coffee is really clean.

  • Even if you’ve been faithfully rinsing your carafe and filter basket every time you brew, your coffee machine could be less than sparkling. Look for chalky mineral buildup in your carafe, water reservoir, and filter basket. If you see any buildup, it’s time for a deep clean.
  • Mr. Coffee recommends that you run a cleaning cycle with vinegar or store-bought cleaning solution about every 80-90 brew cycles. If you live in an area with hard water, you’ll need to clean your coffee maker more often, about every 40 brew cycles. Descaling regularly will keep your coffee maker running smoothly.

Run a cleaning cycle.

  • Reading the user manual isn’t the most fun way to spend your day, but it can be the best way to keep your machine from malfunctioning. Read the cleaning section and carefully follow each step.
  • After you pour in vinegar or cleaning solution, push the start button, ensuring that the cleaning light stays red and stops blinking. You may need to push the button three times.
  • The cleaning cycle should take about 60 minutes. Your machine will pause partway through to allow the cleaning solution to sit in the carafe. Don’t unplug or turn off your machine while the cleaning cycle is running, as this may cause the light to stay on.
  • After the cleaning cycle finishes, rinse your carafe and filter basket thoroughly. You don't want to taste the vinegar in your next pot of coffee!
  • If you didn’t save your user manual, you may be able to find it online.

Unplug and wait a mnute.

  • A classic technology trick: unplug your coffee maker and let it sit for a minute or two. Then plug it back in. This will reset the machine, likely turning off your pesky flashing clean light.

Check the warranty.

  • If all else fails, check if your Mr. Coffee is under warranty. These coffee makers typically come with a limited one-year warranty, so if you’re within that time frame, Mr. Coffee may repair your machine for you.

divider 2

Turning Off a Mr. Coffee Clean Light: Final Thoughts

A tasty cup of coffee is a great way to start your day, but a malfunctioning coffee machine certainly isn’t. We hope this guide has helped you turn off your flashing clean light. Now you can enjoy your clean Mr. Coffee!

divider

Kate MacDonnell

Kate is a lifelong coffee enthusiast and homebrewer who enjoys writing for coffee websites and sampling every kind of coffee known to man. She’s tried unusual coffees from all over the world and owns an unhealthy amount of coffee gear.

Read more

Related posts

Other Categories